ok well i installed the geddy turbo timer the other day with the fd specific harness to keep from cutting any wires hooked the brown wire to the ebrake and the purple to the red/yellow wire behind the gauge cluster for the speedo sensor now i know that this was the wrong wire to hook that up to but anyway after install i tried to start it and nothing ....it turns over but no start checked the fuses nothing blown but theres no power to the fuel pump and no spark to the plugs u can manually turn on the fuel pump at the diagnostic box but other thatn that no power even after taking everything out it still doent work i even bought an ecu off the forums thinking maybe i fried mine and still mo luck the cars been down a monthe and i just bought it someone anyone .....ideas plz . im wondering if i may have fried the ignition switch

 

Check your connections if they are lose you wont be able engauge the starter.

 

started engages just doent get fuel or spark motor turns over just doent crank

 

come on people i need some help here

 

Check your relays.

 

Wish I could help you out but I'm lost on this one. Maybe it's your ignition switch. I'm sure one of the electrical gurus on here will pitch in and help you out. Sorry.

 

Unplug the autotimer harness and see if your ride will start. If it does, check for impedence in the wires on the harness you took out.

 

Telays Are Fine And The Timer Is Out Of The Car Still Wont Start