Car just clicks and doesn't turn over?
#1
Rotary Freak
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: US
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Car just clicks and doesn't turn over?
So I did a search and from doing a search it seems as though my problem is the starter and not getting enough voltage from the battery but I just wanted to get confirmation before making any purchases.
So history/mods of the car is a brand new streetported motor with about 5 miles on it. I have a single turbo kit, so no rats nest or anything.
The car started fine the first 5-6 times I started it to go driving. Then one night the car would turn but wouldn't turn-over until the 3rd or 4th time. Then I noticed a fuel leak so I thought ok, the reason for this is because of a fuel leak possibly.
I went ahead and fixed my injectors and when I go to start the car today, it just "clicks" and doesn't even try to turn. I turned the key 2-3 times and both times just a "click" and no movement in trying to turn.
After doing a search I saw that people had problems with the voltage getting to the starter. I had my car jumped to my Dad's truck and again just a "click"
Checked my PFC when I attempted to start the car without the jump and it was reading only 7.3V or so.
So my question is which is the problem.
#1 Need a new battery?
#2 Need a new starter?
#3 Something else I haven't stated yet
Thank you!
So history/mods of the car is a brand new streetported motor with about 5 miles on it. I have a single turbo kit, so no rats nest or anything.
The car started fine the first 5-6 times I started it to go driving. Then one night the car would turn but wouldn't turn-over until the 3rd or 4th time. Then I noticed a fuel leak so I thought ok, the reason for this is because of a fuel leak possibly.
I went ahead and fixed my injectors and when I go to start the car today, it just "clicks" and doesn't even try to turn. I turned the key 2-3 times and both times just a "click" and no movement in trying to turn.
After doing a search I saw that people had problems with the voltage getting to the starter. I had my car jumped to my Dad's truck and again just a "click"
Checked my PFC when I attempted to start the car without the jump and it was reading only 7.3V or so.
So my question is which is the problem.
#1 Need a new battery?
#2 Need a new starter?
#3 Something else I haven't stated yet
Thank you!
#3
Rotary Freak
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: US
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
No aftermarket security systems
Just checked the main fuse under the hood and main fuse wasn't broken/blown so check that one off.
I'm going to bring the battery to Kragen to get it tested. Hopefully it's something as simple as a new battery.
I'll keep you guys updated
Just checked the main fuse under the hood and main fuse wasn't broken/blown so check that one off.
I'm going to bring the battery to Kragen to get it tested. Hopefully it's something as simple as a new battery.
I'll keep you guys updated
#5
Rotary Freak
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: US
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Went and checked the battery out and it was dead. Picked up a new battery and turned the car over and started. Now there is some gas leaking from my fpr so now I need to fix that!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM