HEY all i just need some help i was told to check the screwtype valve on the TB and i didnt do that yet because i was told that my car should be at 850 rmp at normal with no load on the car, i dont know what to do because the car is allready at 850 at warmup im getting this crazy idle its blup blurp blurp blllaaaa normal then back to the blurp lol i know it sounds a lil crazy but please help me

 

is your idle dropping down at all or waivering while it is making this noise?
If yes, then it is your idle motor or the wiring connection. I had the same thing where the car wanted to stall....ended up being a broken retainer clip on the wiring harness to the idle motor....

 

Since you removed the airpump and don't have a programmable ECU, you'll need to raise the idle RPM to make it steady.

 

were would i find this clip i will check that out its giving me the same thing as if i would have taken the boost thingy near the intake elbo lol sorry i dont know that name but yes when im running the car its fine and then when im at a light it does its crazy dance

 

its at the rear of the engine between the engine and the firewall right at the top.....if you upen the hood and look behind there where there are a couple vacume hoses, its a white clip there. Where in md are you? I can help you out and actually show you in trade for some help (showing) on a b&m short throw, if not...we could meet and I can show you the location.

 

im in germantown md

 

oh ok, thats not that far away