Car died, blank PFC & ticking injectors??
#1
here to disgrace
Thread Starter
Join Date: Feb 2004
Location: Dallas, Tx
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Car died, blank PFC & ticking injectors??
So I was at the track yesterday, and when lining up the car killed itself.
The commander for the PFC has a black screen.
There is a rapid ticking from my injectors.
The car turns over but won't keep itself at idle.
Once I got the car home off the trailer, when I put the keys in, the PFC was going back to monitor mode, instead of the blank screen it was doing before. But the car wouldn't turn over how it would before, which I'm sure because its flooded.
I did a search for "Blank commander" & "injector ticking", and didn't really find my problem.
Any specific ideas of what I should look for? or ideas?
Much appreciated, Thanks
The commander for the PFC has a black screen.
There is a rapid ticking from my injectors.
The car turns over but won't keep itself at idle.
Once I got the car home off the trailer, when I put the keys in, the PFC was going back to monitor mode, instead of the blank screen it was doing before. But the car wouldn't turn over how it would before, which I'm sure because its flooded.
I did a search for "Blank commander" & "injector ticking", and didn't really find my problem.
Any specific ideas of what I should look for? or ideas?
Much appreciated, Thanks
#3
FD Under Construction =P
iTrader: (5)
Check your connections on the crank angle sensors... i've had those do some crazy stuff with the PFC. Also check the grounding cable for the pfc.. make sure it's connected to chassis. I one time had a wire shorting to the chassis and it would cause the car and gauges to go nuts....
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM