3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

cant start

Thread Tools
 
Search this Thread
 
Old 07-03-04, 12:29 AM
  #1  
Olympic Muff Diver

Thread Starter
 
blueskaterboy's Avatar
 
Join Date: Apr 2003
Location: Boston, MA
Posts: 1,301
Likes: 0
Received 0 Likes on 0 Posts
cant start

i turned off my car then when i went to turn it back on the power came on when i turned the key to on and as soon as i turned it to start the power was gone.

and nothing had power... no window, no lights, nothing... a few minutes later the power came back and when i tried to start again it was gone again...

so maybe its either the starter or the wires i think?
Old 07-03-04, 02:22 AM
  #2  
Senior Member

iTrader: (1)
 
littlemilla3's Avatar
 
Join Date: Jan 2004
Location: Brea, CA
Posts: 489
Likes: 0
Received 1 Like on 1 Post
Sounds like a battery. Try to jump it with some cables and someone else's car.
Old 07-03-04, 04:39 AM
  #3  
Senior Member

 
RedRx00's Avatar
 
Join Date: Nov 2003
Location: Baltimore, Marlyand
Posts: 413
Likes: 0
Received 0 Likes on 0 Posts
if you get a multimeter(cheap one that does the job, u can get for like 20 bucks) and see how many volts the battery is holdin. it does sound like the battery though. we you just turn the key to the on postion before crankin it, more then likely everything in the car will work because the battery isnt that dead(YET!). but when you go to crank it and the starter it pullin all that juice from the batt, if its got a low charge its just gonna go dead. but test it with a multimeter, if you got less then 12volts, you defintely need to charge it, which you can easily do by jumping the car and letting it run for a few minutes so the alternator and charge it back up(thas the easy way to do it). a fully charged battery should be 12.6volts
Old 07-03-04, 03:26 PM
  #4  
Junior Member

 
bcseven's Avatar
 
Join Date: Oct 2002
Location: bc
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
battery is dead , it sounds like it is not holding a load
Old 07-03-04, 09:30 PM
  #5  
"Challenged" since 1993

 
Rotarded's Avatar
 
Join Date: Sep 2002
Location: Columbus, Oh
Posts: 540
Likes: 0
Received 0 Likes on 0 Posts
Possibilities:

Loose battery cable
Battery is toast
Starter is toast

All fairly easy to test and/or correct! Good luck!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: cant start



All times are GMT -5. The time now is 01:41 PM.