Can't get any throttle response???
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Ohio
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Can't get any throttle response???
Just put a ported 95 gen3 TT back in my 93 with all the 93 accessories,,,,after 20% throttle it falls on it's nose,,,any suggestions??
#3
Rotary Enthusiast
Join Date: Aug 2003
Location: Calgary, AB
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
We need a little more info...
Does it boost at all? Does it want to stal? Can it go smoothly through the RPM range..?? Sounds to me like your MAP sensor is unhooked.. Check that and get back to us with some more info..
Does it boost at all? Does it want to stal? Can it go smoothly through the RPM range..?? Sounds to me like your MAP sensor is unhooked.. Check that and get back to us with some more info..
#4
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Ohio
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
it has a great idle
If you throttle up very slowly,it will take thrittle to about 3800 rpm,,,,but past about the 20% point of throttle it falls on its face and pops through the exhaust,,,seems to be waaaayyyyy rich at idle and the pre-cat is getting hot when i play with the throttle indicative of a lean condition,,,,the turbos both seem to spool up fine!!
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM