Can anyone read japanese?
12-18-01, 09:15 AM
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: UK
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone read japanese?
Can anyone read the attached page and tell me what it says. Its a picture file so I can't use tha AltaVista translator. What is the disc made of and is it streetable.
Thanks
Thanks
12-18-01, 11:07 PM
#3
20B N/A Wide Body FC3S
Basicly it says it is a pull type replacement clutch, that will bolt direct up just like the stock clutch... Will have about the same pedal pressure as stock and that It comes with a light weight aluminum 1000kg pressure plate, single metal clutch disk, and light weight flywheel...
I also remeber I read somplace that it is rated at 400hp
I also remeber I read somplace that it is rated at 400hp
12-19-01, 02:39 AM
#5
20B N/A Wide Body FC3S
It's supposed to be really easy to drive... AND if I can drive around in Japanese traffic all day with a ORC Triple plate solid hub (no dampening springs) cluch that has 2 setting on and off that can hold 1,000 hp before slipping you definitly shouldn't have any problems driving with that clutch...
Just make sure you do a proper break period on it before you start beating on the car, most people don't realize that the clutch will last a lot longer and hold better if properly broken in... Basicly all you need to do is put about 300 miles on it with lots of shifting and don't slip the clutch too much and of couse don't drop it under power...
Just make sure you do a proper break period on it before you start beating on the car, most people don't realize that the clutch will last a lot longer and hold better if properly broken in... Basicly all you need to do is put about 300 miles on it with lots of shifting and don't slip the clutch too much and of couse don't drop it under power...
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fd3CB
SevenStock Archive
0
09-11-15 11:12 AM