3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Bouncing hood

Thread Tools
 
Search this Thread
 
Old Dec 20, 2001 | 02:45 AM
  #1  
agentnnn's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 12
Likes: 0
From: san diego, ca, usa
Bouncing hood

Hey guys...have an easy one for you. The hood on my 93 R1 jumps around a lot when I'm on the road...it's more pronounced on the driver's side. Not a lot of jumping, but enough to catch my eye and bug me. I looked at adjusting the rubber bumpers but I don't see an adjustment. My rear hatch makes a few squeaks and rattles and I am wondering if those rubber bumpers need adjustment as well.

Could it be that the light aluminum hood is just catching air? Maybe the rubber bumpers are just old and need replacement? Any way to fix this (hood or trunk)? Anybody else dealt with this problem?
Reply
Old Dec 20, 2001 | 03:55 AM
  #2  
potatobbq's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 492
Likes: 0
From: SF
my hood squeaks quite a bit... i think mazda's official solution is to raise the rubber bump stops.

btw, where's that picture in your sig taken at? that building looks very familiar...
Reply
Old Dec 20, 2001 | 10:43 AM
  #3  
Trexthe3rd's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,283
Likes: 4
From: ATL, GA U.S.
I don't believe you can raise the rubber stoppers, but you can adjust the latch mechanism and lower it (in effect pulling the hood tighter).
Reply
Old Dec 20, 2001 | 08:23 PM
  #4  
agentnnn's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 12
Likes: 0
From: san diego, ca, usa
Cool...I'll check out the manual tonight and look into adjusting the latch. Thanks!
Reply
Old Dec 21, 2001 | 01:31 AM
  #5  
skunks's Avatar
I'm a CF and poop smith
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 3,958
Likes: 1
From: Hawaii
the same thing use to happen to me, at 60 mph the hood looked like it was gonna rip off. i have currently put hood pins in and that has seemed to have cured the problem.
Reply
Old Dec 21, 2001 | 10:41 AM
  #6  
GsrSol's Avatar
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Most of the rubber bump stops just screw up or down to adjust. If that doesn't work wrap some tape around the latch.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM




All times are GMT -5. The time now is 08:08 AM.