3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

boost related question...i think

Old Nov 9, 2002 | 04:31 PM
  #1  
drewthrewpoo's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 87
Likes: 0
From: Greensboro NC
boost related question...i think

Well let me give u the short story........Car pulls great in lower rpms......once i get around 6k-ish i would say (tach doesnt work)....the car just doesnt wanna keep pulling.....it pulls good if i shift fairly early but i shifted today and yesterday into 5th around 80 MPH just to see what would happen...and once it hit 85 it's just like there was no more power goin anywhere.....i mean it was CREEPING upward. My friends honda crx DX pulls harder there than i did...seriously. We were messin around the other night and from 1-3rd i wooped his *** bad but once i hit 4th i didnt pull anymore..and i went into fifth about 5 seconds later and he started catching me. I was wondering if this could be or is boost related. Im ordering a boost guage as we speak but i dont have it yet and i really wanna know what this could be. Any input is appreciated. Oh yea....just asking...what's the FD's powerband? When should a regular running car stop pulling (RPM's). Thanks again


Andrew
Reply
Old Nov 9, 2002 | 04:48 PM
  #2  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
It could be boost related, or it could be clutch related. Do you hear the engine revving when you step on the gas, but the car just doesn't take off?

If so, then it's probably your clutch. Currently, my clutch is going out. It slips bad in 4th and 5th gears..

However, you really won't know until you can get your boost gauge hooked up. Then you'll know if you are getting any boost or not.
Reply
Old Nov 9, 2002 | 05:51 PM
  #3  
drewthrewpoo's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 87
Likes: 0
From: Greensboro NC
Well i doubt it's my clutch...i think that's ok. But yea i really do need to get that damn boost guage...this is drivin me crazy. Anyone else?
Reply
Old Nov 9, 2002 | 05:58 PM
  #4  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
You may have a vacuum hose that popped off. Remove the black pressure chamber in front of the intake manifold, and take a peek. Maybe you will find your problem. It's easy to check, and a common spot for "pop offs"
Reply
Old Nov 9, 2002 | 11:39 PM
  #5  
drewthrewpoo's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 87
Likes: 0
From: Greensboro NC
Thanks man. Im gonna check that tomorrow.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
Clacor
Single Turbo RX-7's
19
Sep 11, 2015 08:36 PM
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
FC_DREAMS
General Rotary Tech Support
7
Sep 9, 2015 06:24 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:08 PM.