3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

boost related question...i think

Thread Tools
 
Search this Thread
 
Old 11-09-02, 04:31 PM
  #1  
Full Member

Thread Starter
 
drewthrewpoo's Avatar
 
Join Date: Oct 2002
Location: Greensboro NC
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
boost related question...i think

Well let me give u the short story........Car pulls great in lower rpms......once i get around 6k-ish i would say (tach doesnt work)....the car just doesnt wanna keep pulling.....it pulls good if i shift fairly early but i shifted today and yesterday into 5th around 80 MPH just to see what would happen...and once it hit 85 it's just like there was no more power goin anywhere.....i mean it was CREEPING upward. My friends honda crx DX pulls harder there than i did...seriously. We were messin around the other night and from 1-3rd i wooped his *** bad but once i hit 4th i didnt pull anymore..and i went into fifth about 5 seconds later and he started catching me. I was wondering if this could be or is boost related. Im ordering a boost guage as we speak but i dont have it yet and i really wanna know what this could be. Any input is appreciated. Oh yea....just asking...what's the FD's powerband? When should a regular running car stop pulling (RPM's). Thanks again


Andrew
Old 11-09-02, 04:48 PM
  #2  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
It could be boost related, or it could be clutch related. Do you hear the engine revving when you step on the gas, but the car just doesn't take off?

If so, then it's probably your clutch. Currently, my clutch is going out. It slips bad in 4th and 5th gears..

However, you really won't know until you can get your boost gauge hooked up. Then you'll know if you are getting any boost or not.
Old 11-09-02, 05:51 PM
  #3  
Full Member

Thread Starter
 
drewthrewpoo's Avatar
 
Join Date: Oct 2002
Location: Greensboro NC
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Well i doubt it's my clutch...i think that's ok. But yea i really do need to get that damn boost guage...this is drivin me crazy. Anyone else?
Old 11-09-02, 05:58 PM
  #4  
Cheap Bastard

iTrader: (2)
 
adam c's Avatar
 
Join Date: Sep 2002
Location: San Luis Obispo, Ca
Posts: 8,370
Received 50 Likes on 42 Posts
You may have a vacuum hose that popped off. Remove the black pressure chamber in front of the intake manifold, and take a peek. Maybe you will find your problem. It's easy to check, and a common spot for "pop offs"
Old 11-09-02, 11:39 PM
  #5  
Full Member

Thread Starter
 
drewthrewpoo's Avatar
 
Join Date: Oct 2002
Location: Greensboro NC
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Thanks man. Im gonna check that tomorrow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
11-04-15 04:42 PM
Clacor
Single Turbo RX-7's
19
09-11-15 08:36 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
FC_DREAMS
General Rotary Tech Support
7
09-09-15 06:24 PM



Quick Reply: boost related question...i think



All times are GMT -5. The time now is 09:14 AM.