BNR Stage 2's vs single turbo
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: ny,ny
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
BNR Stage 2's vs single turbo
Was wondering which would flow more air at 1 bar. BNR stage 2's with a bored out turbo manifold, running non-seq. or a single with these specs:
.84 ar hot side with 2.53" wheel /64.5mm
.7 ar cold side with 2.38" wheel/60.5mm
P-trim
Thanks
.84 ar hot side with 2.53" wheel /64.5mm
.7 ar cold side with 2.38" wheel/60.5mm
P-trim
Thanks
Last edited by highspeed101; 12-06-03 at 06:13 PM.
#2
I need more black paint..
iTrader: (3)
Join Date: Dec 2001
Location: Redlands CA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to an article Hot Rod magazine had on turbos, I just started reading it and got distracted, so I'm not sure how much it will help you, but good luck anyways.
http://www.hotrod.com/techarticles/e...bo/index1.html
http://www.hotrod.com/techarticles/e...bo/index1.html
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM