Blitz SBC Spec-R Install
#26
Big Daddy!!!
Join Date: Jul 2002
Location: Edmonton, Alberta, Canada
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
Are you in manual mode or auto mod for boost? If you are in manual mode then setting of 10 ain't going to do ****. Turn it up to 25 or 30 and then you will see your boost going up. The boost control is a ratio from 1-100 so 10 doesn't mean 10psi of boost. On my gt35r to get 14psi of boost I have the setting turned up to 2x. Just trust me and turn up the setting. It will work.
R.K.
R.K.
#28
Big Daddy!!!
Join Date: Jul 2002
Location: Edmonton, Alberta, Canada
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
Ok you don't have an auto mode on your boost controller like the blitz SBC-ID one like I have. My auto mode I just dial in the boost I want on the controller.
Yours is just in manual mode. Like I said in the post above 10 on your boost controller channel 1 does not indicate the boost level. It is a ratio. So if you want 10psi of boost you might have to turn it up to say... 25 or so. Go for a rip and check your boost level and keep playing until you acheive the desired boost setting for that channel.
BTW here are the instructions incase you don't have them:
http://www.blitz-performance.com/inc...Spec%20S&R.pdf
R.K.
Yours is just in manual mode. Like I said in the post above 10 on your boost controller channel 1 does not indicate the boost level. It is a ratio. So if you want 10psi of boost you might have to turn it up to say... 25 or so. Go for a rip and check your boost level and keep playing until you acheive the desired boost setting for that channel.
BTW here are the instructions incase you don't have them:
http://www.blitz-performance.com/inc...Spec%20S&R.pdf
R.K.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
blitz, boost, control, controller, diagram, hook, install, installation, instructions, pre, rx7, sbc, setting, solenoid, spec