Well, ive done my search i havent found anything similar to my case.

All of my blinkers have gone out! if i turn left or right, they dont work but the clicking noise is real fast as if the bulbs were burnt!
I check all of them and they arent!
I turn on the hazard lights and nothing, not even the cliking noise, what coule this be??

 

All the other lights work ? Parking, Break, and Running !?

That would be strange, since they all use the same fuse as I recall... but check the fuses anyhow...

 

Yes everything else works just fine, I just changed the hazard fuse which was the only one that i could find that was related to the blinkers.

 

i have had the same problem for two years now. still trying to figure it out. it probably a burnt wire b/c i have replaced all the fuses and components that make it flash. kvn

 

What other fuses is there to check??? I checked the only 1 that was related to the light in the driver kick panel, and the 2 in the engine bay didnt seem to have anything to do with it. what other ones is there??

 

2 years without blinkers
Where's all the fines!

 

ive found a couple similar threads on second gens while doing the search but they dont have an answer either?

 

i think there is a fuse for the signals (meter one) check that. i would also make sure that your tns relay in the engine bay is in order also. if they worked before and just stopped, you are probably having the same problem i have. it ticks but no lights. it has to be burned out or cut wires. i will get to it soon. kvn

 

Actually, the #2 CPU controlls the flasher opperation. The turn signals and warning signals are on the Hazard (15a) fuse under the dash.

The CPU can become damaged, I'll try to post what I can about troubleshooting from the manual.

Adam