Belt Question
#1
Belt Question
I tried the search feature but I think it is down for the time being..
Anyways, I have a 93 with a T78.. I am running ONLY a water pump pulley and the alternator pulley as well as the main. No idleers or air pumps or PS or AC. Which belt should I use and in what configuration?
Thanks guys!
Anyways, I have a 93 with a T78.. I am running ONLY a water pump pulley and the alternator pulley as well as the main. No idleers or air pumps or PS or AC. Which belt should I use and in what configuration?
Thanks guys!
#2
Mr. Links
iTrader: (1)
Do you have any underdrive pulleys or are those three stock?
http://banzai-racing.com/store/FD_poly-v_belts.html
Your best bet is to use a string to trace the route and them measure the length of the string for your bet size. It will take you all of 5 minutes to do.
http://banzai-racing.com/store/FD_poly-v_belts.html
Your best bet is to use a string to trace the route and them measure the length of the string for your bet size. It will take you all of 5 minutes to do.
#3
Senior Member
iTrader: (11)
There are some who say that there isn't enough belt contact with the water pump without a pulley in the air pump position. If you look there isn't much contact in such case. I would guess though that there are some who are doing this. But, no experience with this myself. So, you might need to change a pulley without anything in the airpump position.
#4
Well after measuring, I get 30.5" or 775mm. I am running a Greddy water pump pulley, a stock alternator pulley, and a pettit Power main pulley. I am just curious as to the best configuration and I am not sure if it will clear the stock thermostat housing/water neck.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM