ok well here is my problem... i cant seem to find the belt for my greddy pullies anywhere... it is a 30.5inch 5 rib belt... it is the one that goes around the main, alternator, and water pump (not running the smog pump)... my question is this, is greddy the ONLY one that makes a belt in this size??? i cant seem to find it anywhere... thanks in advance...
-Keith

 

Pretty much... I searched... then gave up. Went back to stock pullies w/ a 300 4 rib belt. No loss of electric charge anymore.
-Ryker

 

You can special order it from www.k2rd.com

 

This is what put me off fitting one during my last belt change - does anyone know of a kit that uses a commonly available belt?

 

I found a 4 rib at advanced autoparts and its worked great

 

i did also... but how safe is that??? running a 4 rip on a 5 rib pulley???
-Keith

 

still cant find the belt... anyone know the size of this belt???
-Keith

 

p.s. it is NOT a 30.5inch with the greddy pullies... that is what i am looking for... how large is that belt???

 

I have been running a 4 rib belt for years with no problems.

Jason

 

Slow7 - PM Wargasm. He is running the same pullies. I think he bought a 29.5" 6 rib belt at autozone and just cut one of the ribs off w/ a pair of scissors. Looked just like the 5 rib -

the 6 ribs are EVERYWHERE!

Steve

 

thanks guys... but it is something more than 30.5inches... i have a 30 5/8ths and it is a little too small... just looking for what the size is... thanks for the replies...
-Keith

 

If you are using the stock main pulley then its a 31 inch belt.

Jason

 

I am using the Greddy alternator and water pump set as well as the Unorthodox Racing main pulley. This means my belt will be a little smaller than the one you might need because my main pulley is smaller than your stock one.

I bought a 29.5 inch 6 rib Goodyear "Gatorback" belt and then I took a pair of scissors and carefully trimmed off one rib. It has been working fine for 2 years now with no stretching or breaking.

 

I'm almost positive Rotary Performance sells the Greddy Belt separately from the pulleys.

 

its around 31 inches. . .

 

it is 31 inches... thanks so much guys... i got her on a running... i DID order the greddy belt but i needed something to get me moving for now...
-Keith