AVCR...need help programming please..!!!
#1
Big Snail
Thread Starter
AVCR...need help programming please..!!!
Hi, I've got a 93 rx7 and I'm going to install and program my AVCR boost control. I going to program the AVCR with a 13-13-13 boost pattern or 14-14-14 boost pattern. I know u have to toy around with it alot to smooth out the boost curve and to remove the boost spike but I wanted some figures so I could work off. I got some good info of the scuderiaciriani and Rob Robinette's site but still need a little more help...I would greatly appreciate it if fellow FD owners would share your values with me. Also any hints would be appreciated as well. Oh by the way I've got remapped ECU(rx7.com), intake , M2 medium intercooler, 3" downpipe, Apexi GT exhaust, S-AFC. Values needed are as listed below.....
1. Boost/Duty
Set boost at...?
Set duty cycle at ....%..?
2. Boost/Duty Cycle Curve (14psi) or (13psi)
1500rpm: ?
2000rpm: ?
2500rpm: ?
3000rpm: ?
3500rpm: ?
4000rpm: ?
4500rpm: ?
5000rpm: ?
5500rpm: ?
6000rpm: ?
6500rpm: ?
7000rpm: ?
7500rpm: ?
8000rpm: ?
3. Gear Judge: This is what I have....Are they correct...?
1st=125
2nd=070
3rd=049
4th=035
5th=025
Well thats it.....like I said would greatly appreciate it if you could share your values that u entered on the AVCR with me. .......Thanx....Tony
1. Boost/Duty
Set boost at...?
Set duty cycle at ....%..?
2. Boost/Duty Cycle Curve (14psi) or (13psi)
1500rpm: ?
2000rpm: ?
2500rpm: ?
3000rpm: ?
3500rpm: ?
4000rpm: ?
4500rpm: ?
5000rpm: ?
5500rpm: ?
6000rpm: ?
6500rpm: ?
7000rpm: ?
7500rpm: ?
8000rpm: ?
3. Gear Judge: This is what I have....Are they correct...?
1st=125
2nd=070
3rd=049
4th=035
5th=025
Well thats it.....like I said would greatly appreciate it if you could share your values that u entered on the AVCR with me. .......Thanx....Tony
Thread
Thread Starter
Forum
Replies
Last Post
Claudio RX-7
Haltech Forum
5
04-23-19 02:50 PM
Herblenny
3rd Generation Specific (1993-2002)
3
02-20-02 01:33 PM