3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Automatic -> Manual

Thread Tools
 
Search this Thread
 
Old Feb 18, 2003 | 01:56 PM
  #1  
Eternal_Reign's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 44
Likes: 0
From: ma
Automatic -> Manual

Can this be done easily? I'm looking into a car for a good price that needs a new engine but its an automatic. Would it be a big hassle to swap a manual transmission in there at the same time? Can they still be had new from Mazda or would I have to get a used one? Price range? Thanks.
Reply
Old Feb 18, 2003 | 02:51 PM
  #2  
rx7racer11's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 101
Likes: 0
From: Medford Oregon
search...
it can be done but its spendy for someone to do the conversion no parts incl is like 2k parts are going too cost around 2k as well.. its spendy.. and new parts are outta the questions ... find used parts.. or a donor car.. good luck... ps its more cost effective to find manual to start with..,
Reply
Old Feb 18, 2003 | 04:28 PM
  #3  
ejmack1's Avatar
Lawn Ornament
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
actually if you find a good auto, it is less expensive to do the conversion then buy a 5 spd....

My experience....

8,000 for car.
349 for clutch
420 for all other items

8,769.00 pretty reasonable if you ask me.

And yes i was very patient in doing this, and most importantly i did it myself. If you do not plan to do this conversion yourself, please do not even consider getting an auto, for that matter an RX7.
Reply
Old Feb 18, 2003 | 08:47 PM
  #4  
rx7racer11's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 101
Likes: 0
From: Medford Oregon
ej
u got yur tranny, all interior parts, pedals etc.. and rear end for 420??? if so.. hook it up
Reply
Old Feb 18, 2003 | 09:13 PM
  #5  
rx7racer11's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 101
Likes: 0
From: Medford Oregon
Reply
Old Feb 18, 2003 | 10:05 PM
  #6  
aReX-7's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (3)
 
Joined: Aug 2001
Posts: 571
Likes: 0
From: Medford, OR
Originally posted by ejmack1
actually if you find a good auto, it is less expensive to do the conversion then buy a 5 spd....

My experience....

8,000 for car.
349 for clutch
420 for all other items

8,769.00 pretty reasonable if you ask me.

And yes i was very patient in doing this, and most importantly i did it myself. If you do not plan to do this conversion yourself, please do not even consider getting an auto, for that matter an RX7.
Wow, where are you buying used parts man!? 5 spd tranny, fly wheel, diff, axles, drive line, ecu, pedals, starter, master cyl., console cover, etc. all for $420? Are you sure about that? If you pulled it off, good job dude!
Reply
Old Feb 18, 2003 | 11:45 PM
  #7  
ejmack1's Avatar
Lawn Ornament
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
yep, gotta wait man,I found a guy parting out his car, got all the parts i needed for a steal!
Reply
Old Feb 18, 2003 | 11:52 PM
  #8  
ejmack1's Avatar
Lawn Ornament
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
Originally posted by aReX-7
Wow, where are you buying used parts man!? 5 spd tranny, fly wheel, diff, axles, drive line, ecu, pedals, starter, master cyl., console cover, etc. all for $420? Are you sure about that? If you pulled it off, good job dude!
where are you getting console and axles? also for your information i upgraded my ECU at the time, so I didn't include that....
Reply
Old Feb 19, 2003 | 03:09 AM
  #9  
T88NosRx7's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Feb 2003
Posts: 1,559
Likes: 1
From: Seattle, WA
It is very pricey.
Reply
Old Feb 19, 2003 | 04:13 AM
  #10  
BoostedRex's Avatar
NorCal 7's Co-founder
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 4,130
Likes: 5
From: Rocklin, CA
I'm parting out my 5 spd '93 Touring. If you are interested in the parts, PM BanzaiToyota. He is the guy handling the car now since I'm moving to Portugal in a few months. Hope that helps. Laterz.

Zach
Reply
Old Feb 19, 2003 | 08:39 AM
  #11  
jr's Avatar
jr
Senior Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 741
Likes: 1
From: Queens, NY
http://www.jrx7.com/auto5speedswap.htm
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
Oct 4, 2015 06:07 PM
Turblown
Single Turbo RX-7's
1
Sep 30, 2015 05:58 PM




All times are GMT -5. The time now is 02:29 PM.