3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

auto vs manual

Old Aug 5, 2003 | 08:56 AM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 13
Likes: 0
From: Green Cove Springs, FL
auto vs manual

What kind of difference in performance is there on a 3rd gen between an autoamtic and 5-speed? Is there a hp difference or are they both 255?
How does a stock auto 3rd gen run??
How reliable is the auto tranny??
Thanks
Chris
Reply
Old Aug 5, 2003 | 09:25 AM
  #2  
Elegant Black Monster's Avatar
She's on Sale!
Tenured Member 05 Years
 
Joined: Feb 2003
Posts: 208
Likes: 0
From: San Francisco, Ca
The auto tranny is very reliable as long as you don't do a nuetral drop. The performance difference is major off the line but the auto can catch the 5 speed if the power is there.
Reply
Old Aug 5, 2003 | 09:33 AM
  #3  
weaklink's Avatar
Resident Retard
Tenured Member 20 Years
 
Joined: Apr 2001
Posts: 1,918
Likes: 0
From: Cockaigne
stock there is a huge difference. the auto tranny will blow very quickly with only a few mods. BTW I have an automatic. Do a search and you will find these responses echoed throughout the forum. 255 is a figure rated at the flywheel so no difference there, BUT by nature autos have more drivetrain loss, plus they are geared differently since they are 4 speeds.
Reply
Old Aug 5, 2003 | 11:10 AM
  #4  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 13
Likes: 0
From: Green Cove Springs, FL
I am sure there are posts out there about a auto to man swap? How hard would that be on a 3rd gen?

I did it on my 2nd gen N/a along time ago.
Need tranny, driveshaft, clutch, flywheel, pedal, slave and master cyl. and manufacture mounts.

Iam sure these aren't as cheap as the 2nd gens.

thanks for the info.
Reply
Old Aug 5, 2003 | 11:11 AM
  #5  
rex4x's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 183
Likes: 0
From: Fort Collins, Colorado
weaklink is right.. more power is lost... It would be hard to determine an exact number, but there are percentages you can go by to give you a good estimate.
Reply
Old Aug 5, 2003 | 11:41 AM
  #6  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Arrow

Originally posted by yellowvert
I am sure there are posts out there about a auto to man swap? How hard would that be on a 3rd gen?
Yep, just use the search function:

https://www.rx7club.com/forum/showth...hreadid=161482
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:46 AM.