3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Auto Transmission (Bad)

Thread Tools
 
Search this Thread
 
Old 12-03-08, 04:00 PM
  #1  
D's-Rx7

Thread Starter
 
DaV"srx7's Avatar
 
Join Date: Dec 2004
Location: Grants Pass , Oregon
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Auto Transmission (Bad)

Im picking up a used auto trany. and
I was wondering if I canget a better torqconverter..? and how much $$ .?

thanks
Old 12-03-08, 06:53 PM
  #2  
Constant threat

 
bajaman's Avatar
 
Join Date: Jul 2001
Location: near Wichita, Kansas
Posts: 4,952
Received 35 Likes on 31 Posts
Check out Level Ten's website, you can get an upgraded TC for about $1500 or so.
Old 12-03-08, 07:12 PM
  #3  
Rotary Enthusiast

 
Join Date: Feb 2004
Location: california
Posts: 1,083
Likes: 0
Received 3 Likes on 3 Posts
if you can afford to do it right send the trans to level-10 and get the thing rebuilt right. this should put an end to the auto trans problems and allow you to go up to 400 HP without having to worry about the transmission. are you using the Banzai racing harness to control the PFC ? . so far my stock auto trans is holding up fine and shifting like stock with the harness installed.

Jeff
Old 12-03-08, 09:32 PM
  #4  
Full Member

iTrader: (1)
 
fd3rew's Avatar
 
Join Date: Jun 2005
Location: ny
Posts: 128
Likes: 0
Received 4 Likes on 3 Posts
Depending on your budget, you can buy one off the shelf from some big name places (big money and they probably have someone else build it for them) or look for a torque converter shop, they can build you a torque converter any configuration that you want. Just let them know what horsepower you have and what stall speed you want (depending on if you are still on twins or have a single turbo) they can really match everything up well so that you can launch your car off the line at max torque.




All times are GMT -5. The time now is 02:15 AM.