3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Auto tranny out in comes 5sp Manual

Thread Tools
 
Search this Thread
 
Old Feb 3, 2008 | 10:11 PM
  #1  
katkaroto's Avatar
Thread Starter
dewey
Tenured Member 10 Years
 
Joined: Sep 2007
Posts: 580
Likes: 1
From: Minnesota
Auto tranny out in comes 5sp Manual

how hard would this generally be, swapping out a auto tranny for a manual 5 speed tranny? and how much money would i have to invest, and to get a clutch pedal inside my car rightfully tuned?
Reply
Old Feb 3, 2008 | 10:17 PM
  #2  
zheka's Avatar
Full Member
Tenured Member 10 Years
 
Joined: May 2007
Posts: 134
Likes: 0
From: North Port, Florida
I would say it would be eazy if you know what you doing. instaling mechanical staff is not the main problem. it the wireing that is pain in ***, but anyways over all you might be looking around $ 2k if you do it your self.
Reply
Old Feb 3, 2008 | 10:19 PM
  #3  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Arrow

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/so-how-many-people-have-done-auto-manual-swap-258966/
Reply
Old Feb 3, 2008 | 11:02 PM
  #4  
djseven's Avatar
Eh
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Aug 2002
Posts: 6,553
Likes: 344
From: Nashville, TN
If you run a PFC the swap is very easy as far as wiring goes, if you want to run a stock ecu or rechipped(pettit, M2) be prepared to do a lot of wiring or pull the dash.

Right now it is very difficult to find 5 speed pedals but everything else you need can be had for around $1500.00 here on the forums. It can be done in a weekend.
Reply




All times are GMT -5. The time now is 06:48 AM.