Ok I did the 5 speed conversion, using the Auto harness and 5 speed ECU. I jumped the two white wires on the tranny, and the two Big Red and Blue on the Auto Tranny plug. The car will not start for anything Need Help.

I need to know what wiring i have to do on the Auto harness in order to get the car to Run.

Bryan (916) 832-1758

 

I did 2 5 speed swap and I use the 5 speed harness,ecu. This work for me but I don't know about using the AT harness though.

https://www.rx7club.com/showthread.p...06#post2569106

 

Yeah Im having some trouble starting it.

 

Anyone know if you can do the swap with an auto harness and 5 speed ECU

 

CAR is RUNNING Great.......

I used the Auto harness and ECU, i only jumped the white wires, and the Big RED and BLUE wire on the Tranny plugg.

 

can anyone help me figure out which wires these are?

is this the same for S5's?

I'm looking at all the connectors that went to the auto tranny, and I don't see two plain white wires... tried jumping the closest ones, and nothing.
also, don't see a BIG red and blue wire... a couple smaller red and blue ones though...

right now I'm just trying to figure out how to jump the clutch/neutral safety switch thing... I'll worry about the running part after I get the starter to even work.

edit: nevermind, I got it.