auto ecu
#3
Rotary Enthusiast
any piggyback will work. but the pfs purple with pink 9 software seems to be the best. just keep it at 10 psi with the stock ecu and you will be fine with all the bolt on parts. the auto trans is good for up to 325 hp max. don't push it further than that. if you want more hp than that sell the auto and get a manuel car and use a PFC computer and go grazy with mods and tuning.
Jeff
Jeff
#5
Turbo Lover
iTrader: (6)
Join Date: Feb 2003
Location: Cleveland
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
I made 310-315whp on my auto that I FLOGGED the hell out of and had no problems. But seriously just convert it to stick, even if you did all those mods a manual fd with intake catback and downpipe would smoke u. its a light and day difference.
Oh and I ran a PFC when it was auto
Oh and I ran a PFC when it was auto
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM