Attn: Apex BOV owners
#1
Registered Abuser
Thread Starter
Join Date: Sep 2001
Location: Louisville, KY
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Attn: Apex BOV owners
I need pics and/or descriptions of your BOV install. I bought my FD with this unit, and it is not installed as per the directions I got off of Apex's site.
How it's currently set up:
1) Large hose on center of Y-pipe to BOV
2) Manifold nipple (next to boost gauge) to small vacuum on BOV
3) Large hose on rear of Y-pipe to CRV - CRV to Airbox - vacuum on CRV to solenoid (this looks stock)
I'd be curious to see how others have theirs installed.
Thank, Scott.
How it's currently set up:
1) Large hose on center of Y-pipe to BOV
2) Manifold nipple (next to boost gauge) to small vacuum on BOV
3) Large hose on rear of Y-pipe to CRV - CRV to Airbox - vacuum on CRV to solenoid (this looks stock)
I'd be curious to see how others have theirs installed.
Thank, Scott.
#2
Full Member
Join Date: Aug 2001
Location: Bear, Delaware
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
i have this same BOV. Mine is set up in front of the wheel well. It has a thick tube coming from the turbo area, one coming from the intake manifold. and 2 vacuum hoses which come together into one by a three way plastic piece that goes to the bov. I have an electronic boost gauge so it doesn't take the pressure and vacuum readings from the manifold. remember this is a sequential bov. so its taking air from the turbos, and what could potentially blow your motor at the manifold. thats why its like wishhhhh-woshh-wishh.