3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

APEXi Gauges!!

Thread Tools
 
Search this Thread
 
Old 12-29-01, 02:28 PM
  #1  
Senior Member

Thread Starter
iTrader: (5)
 
FDokinawa's Avatar
 
Join Date: Mar 2001
Location: Okianawa, Japan
Posts: 359
Likes: 0
Received 0 Likes on 0 Posts
APEXi Gauges!!

Ok...this is for anyone who has APEXi gauge, especially the new EL ones…..

I don't know if it's just coincidence, but yesterday night I was out racing, I looked up and noticed that my Exhaust temp gauge was maxed out at 12…so I slowed down. but it stayed there, so I pulled over. I heard this tinking sound from the turbin area. My conclusion…exhaust temp sensor broke and was still bouncing around in my exhaust housing. I drove it home to let it cool down so I could remove the sensor and my roommate (riding with me) said that he heard something come out of my exhaust. I get home and take the sensor out…. it was gone…there was about a 1/4 of an inch left.

It suckes but I'm going to contact APEXi and see if it's still under warranty.

Now here's what worries me….the SAME THING just happened to my fiends sensor when he was racing tonight…

Just a heads up for anyone who decides to go with the APEXi gauges…. don't know if it's a defect or what.

Has anyone else had this problem?
Old 12-29-01, 03:25 PM
  #2  
Rotary Enthusiast

 
Join Date: Mar 2001
Location: Walnut, CA
Posts: 761
Likes: 0
Received 16 Likes on 12 Posts
SP Engineering wouldn't touch APEXI gauges for the same reason, the guy said one of their EGT gauge broke and end up costing him a motor.
Old 12-29-01, 06:38 PM
  #3  
Senior Member

 
Join Date: Oct 2001
Location: Minnesota, now in FL and I dont think I'm goin back
Posts: 443
Likes: 0
Received 0 Likes on 0 Posts
I just ordered a boost an temp guage from apexi anyone hear any problems with these?


Mike
Old 12-30-01, 03:43 AM
  #4  
Junior Member

 
HADNSE's Avatar
 
Join Date: Mar 2001
Location: San Fran freaking Cisco
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
to be honest I never fully trusted my EL Apexi boost gauge. it was hard enough paying almost $300 for it but I wanted "the best", peak alerts, playback memory yada yada. anyways, peak hold always revealed alot higher value than anything I saw during memory play (or record for that matter). pissed me off to no end - can I trust this gauge or what!?!! it did this at stock levels and was wayyy optimistic as more mods went on. I think it spiked a few times in the mid-20's!

never heard this from anyone else though so maybe got a crappy one.

good luck.
Old 12-30-01, 04:14 AM
  #5  
20B N/A Wide Body FC3S

 
Dragon's Avatar
 
Join Date: Feb 2001
Location: Okinawa Japan
Posts: 797
Likes: 0
Received 1 Like on 1 Post
Angry

Yea, I was the friend who's ex. temp sensor broke last night, and my fuel pressure gauge has never worked right since I got it... seems like it has a crap pressure sensor... and my boost gauge does the same **** as yours...

I love Apexi stuff, my car is full of it, but the EL series is evidently crap, the guages are cool, but sombody tried to save some $ with shitty sensors...

Last edited by Dragon; 12-30-01 at 04:16 AM.
Old 12-30-01, 06:01 AM
  #6  
Junior Member

 
HADNSE's Avatar
 
Join Date: Mar 2001
Location: San Fran freaking Cisco
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
finally corroboration. I'll say it then. Apexi gauges suck the big one and next time I'm going Defi or VDO.

loved my N1 single exhaust though.
Old 12-30-01, 07:08 AM
  #7  
20B N/A Wide Body FC3S

 
Dragon's Avatar
 
Join Date: Feb 2001
Location: Okinawa Japan
Posts: 797
Likes: 0
Received 1 Like on 1 Post
What suck's is I had a full set of Defi's and sold them to jspecracer7 so I could buy the Apexi's EL's...
Old 12-30-01, 11:09 AM
  #8  
Living life 9 seconds at a time

iTrader: (2)
 
ErnieT's Avatar
 
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes on 0 Posts
I've had Apexi EGT, water temp., fuel pressure, and boost gauges. All work well for over a year now with no problems what so ever. And I race a lot....
Old 12-31-01, 09:12 PM
  #9  
1JZ powered

 
jspecracer7's Avatar
 
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes on 0 Posts
I LOVE THESE DEFI GAUGES!!!!!!!!!!!!!

...and I got them cheap as poop!!!!!!!!

...and they work really good!!!!!!!!!!!!!

...and I'm sad for FDOkinawa and especially Dragon!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM



Quick Reply: APEXi Gauges!!



All times are GMT -5. The time now is 10:27 PM.