Apexi FMIC vs. Greddy FMIC, Pics please
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Dallas
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Apexi FMIC vs. Greddy FMIC, Pics please
sorry if im relighting a fire here, but im very much considering getting a FMIC and i have narrowed down to these two.... just cuirous of what they look like, and how the perform, and difficulty of installation. Thanks a lot to all who answer
Huy
Huy
#3
Senior Member
Join Date: May 2001
Location: Marietta, Ga, USA
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
The best bet is to search the forum but at www.rx7store.net you can see some pics but not as many as there is on here.
~Strike
~Strike
#4
Banned. I got OWNED!!!
Apex FMIC: the best kit available for the FD, IMO. nicest looking from under the hood and from the front. not as aggressive looking as other FMIC kits. the IC sits back a few inches, instead of right in your face. the core uses delta-flow fins that flow air through the IC to the radiator. this helps keeping temps down. also comes with some slick looking Apexi intakes that have been been proven to be the best intakes made. (compared to Blitz, K&N, and Greddy. there is a link somewhere comparing all these filters and the Apex filters were the best.)
Greddy FMIC: second best FMIC kit for the FD, IMO. pain in the *** to install. you gotta hack a lot of **** from the front end of the car. the core has more surface area as the Apex, but it is not as thick. it sits up right on the bumper, giving you the in your face aggressive look. also, i think the only intakes you can use along with this IC are the Greddy foam intakes, which suck major ***. foam filters suck enough already, and the Greddy ones suck even worse.
Greddy FMIC: second best FMIC kit for the FD, IMO. pain in the *** to install. you gotta hack a lot of **** from the front end of the car. the core has more surface area as the Apex, but it is not as thick. it sits up right on the bumper, giving you the in your face aggressive look. also, i think the only intakes you can use along with this IC are the Greddy foam intakes, which suck major ***. foam filters suck enough already, and the Greddy ones suck even worse.
#5
not true! you can use the K&N intakes with the greddy FMIC. the apex intake system works too but you need to customize it a bit.
here are pics from my install....
https://www.rx7club.com/vforums/show...threadid=12735
just scroll half way down... the pics are posted by TTT
here are pics from my install....
https://www.rx7club.com/vforums/show...threadid=12735
just scroll half way down... the pics are posted by TTT
Thread
Thread Starter
Forum
Replies
Last Post