FD3RotorTurbo

iTrader: (1)

my friends car had problems with his turbo and he gave me his HKS SSQ BOV but i dont have the flange that is made for the stock turbos (goes into the y-pipe) anyone know where i can get it? thanks

FD3RotorTurbo

iTrader: (1)

ok... for some reason my computer wont let me post the pic. but this is what its like:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

FormerPorscheGuy

3/4 inch rubber hose? Or is the piece you are talking about metal.

Sesshoumaru

iTrader: (1)

you have the flange on there.

It's what the hose it connected to.

That will work fine for a FD. The stock bov didn't have a flange it used a hose also.

Sponge Bob Square Pants

I'll give you $10 for it.
Come on, you make money and I get a part I need

FD3RotorTurbo

iTrader: (1)

no, im sayin i need the flange. that was just a picture i found off of ebay to show you guys what part i needed. i need the metal flange that goes into the stock Y-pipe.

Sesshoumaru

iTrader: (1)

http://www.rxecret7.com/1410-sa001.html

you can just mount that to your IC pipe if you running after market.

a used bov with correct flange usually runs about 170 tops. I would just buy a used one and sell it.

they prolly do sell what you need but i didnt' look to hard.