1point3liter

I'm about to order a set of aftermarket fans for a stock style radiator (koyo).

Does anyone know the dimension or can you measure the dimensions of your radiator core? I don't have a stock radiator to measure anymore.

Please?

1point3liter

bueller?

I know one of you guys have to be sitting at home with a radiator and tape measure laying around.

Wargasm

If I remember when I get home, I can measure mine. You just want the core size right? Not the end tanks?

Brian

1point3liter

exactly. thanks!

airborne

i think its small x smaller x plastic


but seriously there's no measurements in the manual but i found this here:
http://www.scuderiaciriani.com/rx7/cooling.html#RAD

"I did pull my stock radiator out of storage, unbolt the fans, and got out the dial calipers. The stock core is just about 1" thick, and the Mazda Comp radiator core is 1.5" thick. The end tanks are physically 2" thick, where the stock end tanks are 2" thick only at the crimp locations, and about 1.6" thick elsewhere. "