Mine cracked in half.

 

Do you need the dome shaped piece or the part that goes infront of the gauges?

 

IIRC they stopped selling the 94 textured cluster hood.

 

Aproximately 400 dollars from the dealer

 

I have the same problem on one of my cars, they're $300 if i recall corectly

 

Oops I was incorrect I was thinking about the A/C panel. Here is the link to a thread from a little while ago discussing it. They said it was $259 for the 94+ finish, and that was for the hood and gauge cluster panel (they are only sold together.)
https://www.rx7club.com/showthread.p...ght=gauge+hood

 

94+ hood no longer available per Ray

 

^^^damn, that's not good news at all.

 

I have a JDM one thats in ok condition if you interested. It needs to be cleaned up and stuff but im pretty sure everything is in running condition.

 

better be still available, I just ordered on Friday. 280 or so

 

part# FD15-55-420 Hood,Meter

$261.20 for it and its preeeeeeeeeeeeetty

on a side note, he had the best deal on rx8 brake pads also

 

When did you get that price? I should just order a few of these if they're still available.

 

couple weeks ago i guess

 

Hm. Today Ray said NLA for 94 and about $320 for 93. I guess I will have to glue mine..

 

do fiberglass under it and putty on top sand paint there you go

 

urethanesupply.com has products and info on how to work with plastics
Hood stamped as P-CT/P-AB and I can't ID this material on their website. Closest I see - requires their "weld" method. Like brazing, but melting special rod with solder iron insted.

Mine cracked straight from front to back, if I was able to glue it on a back - there would be no need for refinishing outside, hairline crack would be bareley visible only if you look closely.

However, I tried 3 different plastic epoxies I have on open spot and none will stick. I can peel all of them with a knife. I didn't score/sand surface, but this is good test to tell that it won't hold. At least not with epoxy I have... I did clean surface with alcohol.

Maybe some kind of plastic adhesive promoter?

 

repair mine cause somebody sat on it ,broke it in 8 pieces scorch the top with 200 grid sand paper put filler putty sand with 400 than 2000 wet sand. primed it and paint