3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Anyone heard of Amuse exhaust

Thread Tools
 
Search this Thread
 
Old 10-03-06, 09:07 AM
  #1  
Senior Member

Thread Starter
iTrader: (3)
 
DDagman's Avatar
 
Join Date: Aug 2005
Location: Foster city Ca
Posts: 334
Likes: 0
Received 0 Likes on 0 Posts
Anyone heard of Amuse exhaust

I was borwsing the bulletproofatomotive.com site last night and i looked at the exhuasts. The only two they had were both made by Amuse and imported directly from japan. One was a DP back exhuast with 89.6mm piping and the other was a catback with 80mm piping. Anyone heard anything of these exhausts? They seemed really nice and im looking into investing in one of them. i forgot to mention they are $1750 and $1100 respectively
Old 10-03-06, 10:10 AM
  #2  
Will u do me a kindness?

iTrader: (2)
 
the_glass_man's Avatar
 
Join Date: May 2001
Location: Parlor City, NY
Posts: 5,031
Likes: 0
Received 4 Likes on 4 Posts
They are very nice exhaust that are vastly overpriced. They are made out of Ti and are not mandrel bent. Instead they use the JDM cut and weld method.
Old 10-03-06, 10:17 AM
  #3  
ninja

iTrader: (3)
 
BoostedFd3s's Avatar
 
Join Date: Aug 2005
Location: Statesville/Greensboro, NC
Posts: 1,192
Likes: 0
Received 0 Likes on 0 Posts
nice exhaust...and like the_glass_man said...they are overpriced...

Great craftsmanship though...
Old 10-03-06, 10:45 AM
  #4  
Registered User
iTrader: (61)
 
purerx7's Avatar
 
Join Date: Apr 2004
Location: Los Angeles, CA
Posts: 7,334
Likes: 0
Received 5 Likes on 4 Posts
for that price i would pick up the re-amemiya dolphin tail exhaust
Old 10-03-06, 11:54 AM
  #5  
90s riceboy

iTrader: (15)
 
EUROX's Avatar
 
Join Date: Feb 2002
Location: San Diego
Posts: 570
Received 9 Likes on 8 Posts
It's probably a really high quality piece, but an exhaust is an exhaust really. I do appreciate the whole cut and weld craftmanship though, it always looks fantastic.

Bulletproof Automotive has some ridiculous prices though. You think that's expensive, try looking at their prices for a titanium BMW M3 exhaust. $3000+ from what I last remember.
Old 10-03-06, 11:59 AM
  #6  
Sponsor
RX7Club Vendor
iTrader: (10)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,216
Likes: 0
Received 4 Likes on 4 Posts
Amuse makes probably one of the *greatest* FULLY titanium exhausts for the FD (and for a whole host of JDM cars for that matter). And as such, it's by far THE LIGHTEST exhaust available. I don't have a price on me now, but I know it's quite expensive, but I can get 'em for a bit cheaper. I've been eyeing the Amuse exhaust for quite some time now actually...

~Ramy
Old 10-03-06, 01:30 PM
  #7  
Archie is Gay

 
fsae_alum's Avatar
 
Join Date: Feb 2006
Location: San Diego
Posts: 354
Likes: 0
Received 1 Like on 1 Post
^ Ramy...is there anything you CAN'T get? If so, I know of some gentlemen in D.C. that would be willing to pay you quite a number of millions of $$$ if you could get something...errr...someone for them.
Old 10-03-06, 02:26 PM
  #8  
400Rwhp Seq Twins Baby!!

 
Rixio_Scon's Avatar
 
Join Date: Mar 2006
Location: "Sunny" ol England
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
The question is how does it sound though...thats what i hate when it comes to these sort of things...intakes,bovs & exhaust...every one sounds different!
Old 10-03-06, 02:30 PM
  #9  
Rotary Enthusiast

 
kuroi FD's Avatar
 
Join Date: Jan 2005
Location: orlando/st. petersburg
Posts: 769
Likes: 0
Received 0 Likes on 0 Posts
sound clip and pic?
Old 10-03-06, 05:39 PM
  #10  
RX7FD3S

iTrader: (3)
 
RX7LINK's Avatar
 
Join Date: Jun 2005
Location: South Bay, North Cali.
Posts: 1,489
Received 7 Likes on 5 Posts
way overpriced. might as well get Apexi N1 GT. looks about the same
Old 10-03-06, 07:43 PM
  #11  
Sponsor
RX7Club Vendor
iTrader: (10)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,216
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by fsae_alum
^ Ramy...is there anything you CAN'T get?
I'm sure one day I'll come across something that I can't get...but then I'll fix it so that I can Check out the first paragraph on my website (www.FDNewbieImports.com)

If so, I know of some gentlemen in D.C. that would be willing to pay you quite a number of millions of $$$ if you could get something...errr...someone for them.
I dunno how well Customs would deal with ppl getting stuffed into boxes and containers

As for the comments about it being overpriced or wanting sound clips etc, allow me to share a perspective with you guys. The average product - priced for consumption by the average consumer - must offer every bit of edge it can to help sell itself. Sound clips, pics, install shots, warranty, etc.

Then there's another category of parts that are for the distinguished buyer - namely the extremely performance oriented (or show oriented) consumer. The one who will spare no expense to buy the best of the best, the top of the line items. Those items need no advertising; they sell themselves. They WILL be bought, regardless of the existance of pictures, sound clips, warranty, etc. Ppl buy these items sight unseen. The Amuse exhaust falls into this category.

Lastly, there's the "so dirt cheap that *anyone* can afford it" aka Ebay category. Stolen pics, stolen sound clips, no warranty, and a price so low, you'd think the material was plastic, not metal.

So in short, while I hear your concerns, in a non-confrontational and respectable manner, allow me to ask you to ask yourself one simple question: had Amuse posted up pictures, sound clips, and warranty info, and it was exactly what you wanted...would you REALLY buy it knowing it would set ya back a cool $2,000 or so when all was said and done? I think you now get my point...

~Ramy
Old 10-03-06, 08:04 PM
  #12  
Senior Member

iTrader: (1)
 
ttmott's Avatar
 
Join Date: Aug 2006
Location: Space Coast Florida
Posts: 398
Likes: 0
Received 8 Likes on 4 Posts
Originally Posted by FDNewbie
I'm sure one day I'll come across something that I can't get...but then I'll fix it so that I can Check out the first paragraph on my website (www.FDNewbieImports.com)

I dunno how well Customs would deal with ppl getting stuffed into boxes and containers

As for the comments about it being overpriced or wanting sound clips etc, allow me to share a perspective with you guys. The average product - priced for consumption by the average consumer - must offer every bit of edge it can to help sell itself. Sound clips, pics, install shots, warranty, etc.

Then there's another category of parts that are for the distinguished buyer - namely the extremely performance oriented (or show oriented) consumer. The one who will spare no expense to buy the best of the best, the top of the line items. Those items need no advertising; they sell themselves. They WILL be bought, regardless of the existance of pictures, sound clips, warranty, etc. Ppl buy these items sight unseen. The Amuse exhaust falls into this category.

Lastly, there's the "so dirt cheap that *anyone* can afford it" aka Ebay category. Stolen pics, stolen sound clips, no warranty, and a price so low, you'd think the material was plastic, not metal.

So in short, while I hear your concerns, in a non-confrontational and respectable manner, allow me to ask you to ask yourself one simple question: had Amuse posted up pictures, sound clips, and warranty info, and it was exactly what you wanted...would you REALLY buy it knowing it would set ya back a cool $2,000 or so when all was said and done? I think you now get my point...

~Ramy

Ramy,
Very Amuseing.....
What - someone had to say it....

On another short subject - what is the story on the R-Magic hoods???? Did they buy the molds from M2?? I have on my car one of the four or so carbon originals from M2. It is with out a doubt one of the best looking hoods i've ever seen...
Old 10-03-06, 08:10 PM
  #13  
Sponsor
RX7Club Vendor
iTrader: (10)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,216
Likes: 0
Received 4 Likes on 4 Posts
Originally Posted by ttmott
Ramy,
Very Amuseing.....
What - someone had to say it....
Hey I'm not trying to be mean; just being real. And it's no secret that I cater primarily to that crowd (hence the rare JDM market).

On another short subject - what is the story on the R-Magic hoods???? Did they buy the molds from M2?? I have on my car one of the four or so carbon originals from M2. It is with out a doubt one of the best looking hoods i've ever seen...
I honestly don't know the story behind it, but if I had to guess, I'd say it's the other way around (that M2 copied R-Magic). Who knows...

~Ramy
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM
FührerTüner
General Rotary Tech Support
3
09-04-15 01:41 PM



Quick Reply: Anyone heard of Amuse exhaust



All times are GMT -5. The time now is 08:42 PM.