Anybody have TEC upgraded twins?
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,392
Likes: 0
From: Mechanicsburg, PA USA
Anybody have TEC upgraded twins?
Looking into upgrading my twins and Dave at KDR recommended TEC to rebuild my turbos with higher flowing ones. Anybody running these or know fo anyone? Supposedly it costs around $1400-1800 depending and you gain 25 hp.
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,392
Likes: 0
From: Mechanicsburg, PA USA
T04S is an option and is my first single I'd go with - but I'd have to go with larger injectors (1600cc), fuel pressure reg., fuel rail, etc. - we're looking at twice the expense for a single. I'd be running the upgraded twins non-sequentially so I'm fine with 1200cc injectors and the PFC. Not planning on running over 13-14 psi. Want around 350 rwhp.
Senior Member
Joined: Dec 2001
Posts: 691
Likes: 0
From: The Land Of No Pistons
Why do you need 1600cc injectors? XS recommends 1300....you can survive with the 1200 for awhile too. You can easily run a bar on 1200cc injectors.
Why would you need a fuel rail. I have a To4s and boost a bar day and night. 1300cc secondaries, HKS FPR, fuel pump and PFC. Everything else is just overkill.
Why would you need a fuel rail. I have a To4s and boost a bar day and night. 1300cc secondaries, HKS FPR, fuel pump and PFC. Everything else is just overkill.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM