3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Any help with boost problems?

Thread Tools
 
Search this Thread
 
Old Mar 17, 2002 | 11:10 PM
  #1  
rexman7's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 86
Likes: 0
From: Monroe,LA
Any help with boost problems?

I just put an open air intake(k+n cone filters) and fmic on my car and now my second turbo doesn't boost the same.I get like 11-5 then slowly builds to about 8or9.Before the boost was fine,and not such a big drop in transition. the pcv vent to the atmosphere- is that my problem or could it have to do with removing the air pump- i just plugged the lines going under the manifold.i also have a good bit less vacuum it was like 440 now its like 390 on my pfc i hope its an easy fix but if not i'll probably go non-seq. thanxs for any replies
Reply
Old Mar 18, 2002 | 12:17 PM
  #2  
rexman7's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 86
Likes: 0
From: Monroe,LA
Bump.......

Anybody, any ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
gabescanlon
3rd Generation Specific (1993-2002)
7
Sep 5, 2015 12:09 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM




All times are GMT -5. The time now is 04:49 AM.