3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Another Q on wiring harness - please help!

Thread Tools
 
Search this Thread
 
Old Jun 18, 2007 | 09:15 AM
  #1  
Johnf7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: May 2007
Posts: 22
Likes: 0
From: Chicago
Another Q on wiring harness - please help!

Hey guys!

Im hoping for a little help

I droped my engine back in last weekend, nearly ready to start it up except I have a couple connectors that I cant find a home for!

1st two are behind the altenator, on page C-83 on the FSM the plug that is just below the oil filler neck and to the left (the one that is un attached in the pic), Does anybody know what this is supposed to be connected to?? and also the one that is to the right of it(that is attached on the pic)??

The 2nd two conectors that I am having a problem with is below, these come from the harness that is connnected to the fuse box





Im just after remembering, can somebody confirm if the above connects near the oil pressure sender?

I would appreciate help on this guys!
THanks
John

oh btw, car is a JDM type r ser 6, still on twins
Reply
Old Jun 18, 2007 | 11:47 AM
  #2  
kf3er's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2003
Posts: 119
Likes: 0
From: Seattle
Both those connectors go to the A/C compressor. Look under the P/S pump and you'll see the thier mates on the top of the A/C compressor. The single contact white connector attaches in fron of the blue connector and is difficult to see.
Reply
Old Jun 18, 2007 | 02:02 PM
  #3  
Johnf7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: May 2007
Posts: 22
Likes: 0
From: Chicago
Originally Posted by kf3er
Both those connectors go to the A/C compressor. Look under the P/S pump and you'll see the thier mates on the top of the A/C compressor. The single contact white connector attaches in fron of the blue connector and is difficult to see.
Thanks!! That makes sense.

Ill get a pic of the first 2 connectors I mentioned to give a better idea

Thanks again!!
Reply
Old Jun 19, 2007 | 05:29 AM
  #4  
Johnf7's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: May 2007
Posts: 22
Likes: 0
From: Chicago
Guys, these are the other 2 conections I was talking about....can somebody tell me what they connect to??



Thanks
J
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM
nkuhajda
New Member RX-7 Technical
2
Sep 7, 2015 04:07 PM




All times are GMT -5. The time now is 10:54 AM.