Another hose question
06-04-06, 08:32 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Austin, TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Another hose question
Hey guys,
I've got two hose questions for you guys. Thanks for all your help so far. I've been looking through the repair manual and I can't figure these two out.
1. In the attached picture I circled a hardpipe on the solenoid rack. Where does that go to? My guess is the large pipe on the front side of the UIM but I'm not sure. Can someone please tell me where this is supposed to connect to?
2. On the bottom of the UIM there are two valves. One is the IAC, but I don't know what the other is. Where the 'other' one attaches to the UIM is a large hardpipe. Where does that hardpipe connect to? Thanks guys!
Thanks!
I've got two hose questions for you guys. Thanks for all your help so far. I've been looking through the repair manual and I can't figure these two out.
1. In the attached picture I circled a hardpipe on the solenoid rack. Where does that go to? My guess is the large pipe on the front side of the UIM but I'm not sure. Can someone please tell me where this is supposed to connect to?
2. On the bottom of the UIM there are two valves. One is the IAC, but I don't know what the other is. Where the 'other' one attaches to the UIM is a large hardpipe. Where does that hardpipe connect to? Thanks guys!
Thanks!
06-04-06, 11:15 PM
#2
Senior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Austin, TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Ok, after looking at it some more, I'm pretty sure the hardpipe I have circled is PCV ventilation out of the oil filler neck and back into the intake before the turbos. If someone could confirm that, that'd be great. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM