I finally got the fitting on that goes to the fuel rail, but when I blow into it, I can blow into it without it building pressure. If you know what I mean. So the question is....is there a leak, or is it supposed to be like that.

 

also we got some of the lines on, and we have a little bulging of the braides, will that affect anything or should it be okay?

 

I'm not quite sure what you are asking but if you blow into one side of the fuel rail, as far as i know it should blow out the other side and as far as bulging goes, i'm not to sure but it doesnt sound to good.

 

bulging doe not sound good.... the fittings should go straight on... are you sure you are matching the sizes of fittings/lines?

 

well I would hope the Rx-7 store sent me the right fittings and sizes. The bulging is on the braids not the line itself. rxrotary2 7 you should give me a hand

 

^^