im trying to polish my alternator cover, and i have the front cover off, and the rear is a pain, i have searched and found nothing about the rear, supposly to wiggle it out... i have tooken out four long bolts in the front , four bolts in the inside front , and for the rear , have tooken everything out, black plastic piece .. so the rears are loose but not sure how it goes straight out, is there something im missing ?? any would help

 

There are four wires in the back that are soldered into place. You better off not trying to remove it. Mask the coil and polish the housing with it in place.

 

I remove every thing with out taking the wires loose ,for polishing, Keep looking ,if I can do it so can you . I do not know what you are doing wrong .I would help if I could see what you have done .