ecarver2

I have no airbag. Please help me. It beeps a couple times, fivetimes over. I cant stand it, it must be stopped!

axr6

I don't remember beeping when I removed my air bag/steering wheel. The air bag light did come on. To get rid of that I could either insert a straight jumper wire between the two connectors that used to connect to the airbag or, if the connector wire harness was removed at the connectors under the steering column, insert a 1 ohm resistor into the same two wire connectors.

that should make the system "sense" the presence of an airbag.

Albert

ecarver2

my car had the whole steering colum and clock spring removed, it was kindof micky moused.

axr6

Ok, if you had the clockspring removed you will need a 1 ohm resistor placed across the connector terminals under the steering column. The terminals are those that the air bag used to connect to. When I did mine, I did not have a 1 ohm resistor. I simply used an about 8" length of welding wire that came close to being 1 ohm. I cut off the connector as I saw no real good way to attach my wires to it and installed a pair of spade type connectors on each wire. I wrapped the wire in heat shrink and coiled it up under the steering column cover.

Albert

ecarver2

I was thinking more along the lines of where is the frickin box that beeps and whats the best way to remove it. I have not really looked for it yet. I was just fishing around for sme past experience.

DaleClark

iTrader: (55)

Yeah, just find and unplug the airbag computer. Follow the beeping sound .

Dale