Hey guys, did some searching and couldn't find the help I needed..

Just recently bought a 93 R1 and the Airbag light stays on constantly w/ no flashcodes.

The previous owner at one time had removed the stock wheel and used an aftermarket wheel. Assuming that when he put the stock wheel back on and wired the airbag back properly, is there a way to clear the code? Pulling the battery won't clear the code.

Is there an airbag diagram that I might be able to follow to verify if there isn't a break in the system?

Thanks guys

 

Disconnect the battery, press/hold the brake pedal for ~15 seconds. That will clear/reset the ECU.

If that does not work, you can take the cluster out and remove the bulb behind the light.

 

I'll try to reset the ECU again but didn't seem to work last time, and I'm not one for pulling bulbs, I like to fix the issue

 

Go to the sticky at the top of this forum that says, "Tech Manual Directory". The second entry has the "Electrical Body Manual", download it and the section on airbags will give the all the info. you need.