Aftermarket P\S PULLEY
#1
Former Site Sponsor
Thread Starter
Join Date: Aug 2003
Location: Tacoma WA
Posts: 4,368
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket P\S PULLEY
Is there a place that makes an aftermarket P\S pulley???? if there is who is it??? and if there is not would you guys want them made and what price tag would you guys want to see...
For thoes that dont know mazda list for these is right around 104.00 from MAZDA I was thinking around $50.00-$80.00 {before shipping} depending on the end cost...
Would this be a good idea???
Let me know what you guys think...
Later
Dan Atkins
For thoes that dont know mazda list for these is right around 104.00 from MAZDA I was thinking around $50.00-$80.00 {before shipping} depending on the end cost...
Would this be a good idea???
Let me know what you guys think...
Later
Dan Atkins
#2
Gone to the dark side
iTrader: (9)
Join Date: Jun 2005
Location: New Orleans, LA
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
I think it's a great idea as both UO Racing and SRM want over $140 per pulley and in some cases higher...
I would prefer if we had one made that it be billet (or close) and annodizing would be optional.
I'd be happy to pay $50-$80 for one as would at least 5 people I know... so much so that I'd front their cash.
I'm all for this!
I would prefer if we had one made that it be billet (or close) and annodizing would be optional.
I'd be happy to pay $50-$80 for one as would at least 5 people I know... so much so that I'd front their cash.
I'm all for this!
#3
Former Site Sponsor
Thread Starter
Join Date: Aug 2003
Location: Tacoma WA
Posts: 4,368
Likes: 0
Received 0 Likes
on
0 Posts
I know UO and SRM make\sell under drive pullies by do thay make the P\S ones for our RX7?
Not to be a butt but that is the whole point of this thread...
DAn
Not to be a butt but that is the whole point of this thread...
DAn
#4
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
My son has made some but we need a broken stock one to get the center from .I press the center into the alum pulley he turns . If you make them I am sure they will sell .
#6
Mr. Links
iTrader: (1)
Originally Posted by Atkins Dan
I know UO and SRM make\sell under drive pullies by do thay make the P\S ones for our RX7?
Not to be a butt but that is the whole point of this thread...
DAn
Not to be a butt but that is the whole point of this thread...
DAn
http://www.srmotorsports.com/sr93plly.html
Pettit Racing:
http://www.pettitracing.com/rx7/index_performance.htm
Not sure if Rotary Performance carries them as their site isn't working for me currently. If you can make and offer them cheaper than either of those two, you'll probably have some good sales.
Trending Topics
#9
Senior Member
Join Date: Feb 2004
Location: Sebring, FL
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
I was just posting last week looking for one. . . the ones I found are listed above and are selling for around $140. Little too rich for my blood right now, but I would be willing to pay 70-80 for a quality part. I would imagine the AC pulley would be a little more difficult because of the clutch.
#13
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
How about a pair/set of A/C & P/S pullies? AO only sells their kits in polished now and I would prefer to have matching A/C & P/S then those two looking different and a fancy set for the rest. Even if they don't match the AO exectly if they still matched as a pair it would look niver then those being different and the orther pullies different as well.
#15
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
UO racing makes a stock size PS pulley and it goes in the $125 to 140 range. UO makes most of the pullies in stock diameters as well as under drive. I also hav there stock size water pump pulley, the only one I'm running under size is the alternator.
#16
Gone to the dark side
iTrader: (9)
Join Date: Jun 2005
Location: New Orleans, LA
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Atkins Dan
I know UO and SRM make\sell under drive pullies by do thay make the P\S ones for our RX7?
Not to be a butt but that is the whole point of this thread...
DAn
Not to be a butt but that is the whole point of this thread...
DAn
and yes I mean Power Steering Pulleys.
#20
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Atkins Dan
Well for now I have factory ones in stock 99.00 shipped within the US and Canada if yoiu want it...
Dan
Dan