after a fast reactive ait sensor and 3 bar map sensor
#1
imitek
Thread Starter
after a fast reactive ait sensor and 3 bar map sensor
could you possibly put up links and part numbers please i have been looking all i can find is
#53003 motec part number think this is the delco 12223861 but unsure of its response time
im comparing to the omni 4 bar as i have experiance with this on another car
http://www.maperformance.com/omnipow...evo-evo-x.html
and an ait sensor something better than stock
all i can find is an aem sensor
Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT but unsure if it will fit in the original hole
also can any one specify the standard ait sensor hole size
#53003 motec part number think this is the delco 12223861 but unsure of its response time
im comparing to the omni 4 bar as i have experiance with this on another car
http://www.maperformance.com/omnipow...evo-evo-x.html
and an ait sensor something better than stock
all i can find is an aem sensor
Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT but unsure if it will fit in the original hole
also can any one specify the standard ait sensor hole size
#2
Rotary Porn Addict
iTrader: (2)
Join Date: Jul 2014
Location: Charleston SC
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Check out wannaspeed.com, search best reacting IAT sensor for RX7, rx7.com for 3 & 4 bar map sensors from what I've read a three bar is capable of 29 psi and a four bar is capable 43 PSI
#4
Got my fast reacting IAT sensor from lms-efi.com. Put it in the car on Nov 30th, 2013 and have had no issues with it so far. I'd buy one again too. Nice guy, into rotaries and shipped to Australia with zero hassles. Gets my thumbs up
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
befarrer
Microtech
3
08-22-15 05:52 PM