After engine rebuilt: what tipe of "special care" will be nedded ?????
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: ARGENTINA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
After engine rebuilt: what tipe of "special care" will be nedded ?????
I´m getting my car of the mechanic next week, and I would like to know what tipe of "special care" will be nedded to take on account during the first Milles.
Not reving upper 4000prm on the first 1000milles?
thanx!
Not reving upper 4000prm on the first 1000milles?
thanx!
#6
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
I am utterly baffled by these threads. If you are having an experienced rotary mechanic rebuild your motor, just follow their break-in procedure!
Barring that, I think Rick's break-in procedure makes the most sense to me out of anyone I've heard.
Barring that, I think Rick's break-in procedure makes the most sense to me out of anyone I've heard.
Trending Topics
#9
Full Member
Thread Starter
Join Date: Oct 2005
Location: ARGENTINA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys:
Thanx for your help.
I asked my mechanic and he told me under 3500 on the first 750 milles.
Now I realized that he was ok, but takeing on account that I live in Argentina, a country that has about 15 Rx7 today, and only ONE mechanic who knows about rotary, I thought that would be ok to ask to this beautifull forum for a piece of advice.
Thanx u all!
And If someone knows SOMETHING about TURBOS ( specially 20b cosmo and FD) please help me with this question!!!
https://www.rx7club.com/showthread.p...=1#post5784690
good bye and thanx again!
alexis
Thanx for your help.
I asked my mechanic and he told me under 3500 on the first 750 milles.
Now I realized that he was ok, but takeing on account that I live in Argentina, a country that has about 15 Rx7 today, and only ONE mechanic who knows about rotary, I thought that would be ok to ask to this beautifull forum for a piece of advice.
Thanx u all!
And If someone knows SOMETHING about TURBOS ( specially 20b cosmo and FD) please help me with this question!!!
https://www.rx7club.com/showthread.p...=1#post5784690
good bye and thanx again!
alexis
#10
Full Member
Thread Starter
Join Date: Oct 2005
Location: ARGENTINA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
I am utterly baffled by these threads. If you are having an experienced rotary mechanic rebuild your motor, just follow their break-in procedure!
Barring that, I think Rick's break-in procedure makes the most sense to me out of anyone I've heard.
Barring that, I think Rick's break-in procedure makes the most sense to me out of anyone I've heard.
Sorry men, I just wanna be sure that this mechanic was ok, I ´m not very sure about everything he says..... but is the only one!
Excuse me Rynberg!
Good bye!
#11
Senior Member
Join Date: Sep 2001
Location: Maryland
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by enigma662
Rick at Rick's Rotary recommends keeping it under 4k for the first 500 miles, then gradually rising to redline over the next 500. Boost and full throttle is fine.
#12
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Originally Posted by RX7HotPepper
Sorry men, I just wanna be sure that this mechanic was ok, I ´m not very sure about everything he says..... but is the only one!
Excuse me Rynberg!
Good bye!
Excuse me Rynberg!
Good bye!
#13
Full Member
Thread Starter
Join Date: Oct 2005
Location: ARGENTINA
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
Sorry about the attitude. I would follow a mix of your builder and the Rick's Rotary suggestion described above.
thanx u all guys!
Rynberg, can u help me with this please? Thanx!
https://www.rx7club.com/showthread.p...32#post5789432
Congratulations for this beautiful forum!
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM