advice on mods
advice on mods
hey guys, i have 93 rx7 that's relatively stock, only mods so far are intake, exhaust and blow off valve, timer on the way. anyway, i have about 4 grand to spend on it and was wondering the best way to go about raising performance while keeping the stock turbos, ie.. boost controllers, fuel management, whatever. i am still kinda new to the whole turbo field but learning pretty quick, any advice would be helpful. thanks
Porting, lightweight flywheel, apex'i power fc, pulleys, new vacuum lines, coilovers, springs....
you have a lot of options depending on what you are going for (whether it be drag racing or road racing or autoX).
you have a lot of options depending on what you are going for (whether it be drag racing or road racing or autoX).
thanks for the link. i found alot of useful stuff there. i am pretty satisfied with the stock suspension. i think i am looking a little more towards increasing the boost and raising hp. i think i confused myself a little earlier while looking through some online shops. there's all kinds of crazy stuff available, such as a kit to install more injectors with their own controller. cant the stock injectors be replaced with larger ones and an aftermarket fuel pump if i need more fuel flow? these things seem to be way different from the LS-1 i am used to.
Thread
Thread Starter
Forum
Replies
Last Post



