3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Add coolant

Old Aug 13, 2008 | 07:59 PM
  #1  
iluvjdm's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2008
Posts: 22
Likes: 0
From: Canada
Add coolant

i was just doing my normal driving
and the add coolant light came on out of no where with a loud beep noise
and the meter was pulling up to hot slowly
so i pulled over and added more coolant
and turned the engine on again
add coolant light was still on with the loud beep noise
any suggestions ??
Reply
Old Aug 13, 2008 | 08:18 PM
  #2  
hsitko's Avatar
Archdandy
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2006
Posts: 550
Likes: 3
From: Predominantly educated metropolitan area
Suggestion is search button
either bad coolant seals, coolant leak, or just had your coolant replaced and not bled properly. Search up. There is lots of talk about these problems. Mine happened to be an engine rebuild due to bad coolant seals. Good luck!
Reply
Old Aug 13, 2008 | 11:38 PM
  #3  
iluvjdm's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2008
Posts: 22
Likes: 0
From: Canada
any more suggestions?
Reply
Old Aug 14, 2008 | 12:29 AM
  #4  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,603
Likes: 15
From: Toronto, Canada
Just keep topping it off every time you start the car. If your coolant is continually low, might be evidence of a coolant leak.

thewird
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:14 AM.