Ac conversion
The following users liked this post:
JP3 Motorsports (10-29-23)
#2
Shooting for 500
iTrader: (3)
Check out this thread from JP3 on their r134a conversion stuff. I used their kit and expansion valve with an rx8 compressor and condenser. Works great.
https://www.rx7club.com/vendor-class...x7-ac-1161114/
https://www.rx7club.com/vendor-class...x7-ac-1161114/
The following 4 users liked this post by coxxoc:
#3
#5
Senior Member
iTrader: (1)
I overhauled my original system myself about 2 months before this JP3 kit was available, and it was a real pain. I did have access to R12 which is why I did it. In my FB I did a straight r134a conversion and it blew cold on the highway but not at idle and I'd expect similar results with the original FD system on 134a.
I also helped install a JP3 kit in a friend's car after that, and let me tell you that kit is the way to go. Top-notch quality across the board and very well thought out. I really wish it had been out when I redid my system, or that I'd procrastinated a bit longer on my own AC so I could have gone that route. Having done AC in a few RX7s now I can highly recommend that kit. Just do that and save yourself a bunch of headaches or a sub-par AC system.
I also helped install a JP3 kit in a friend's car after that, and let me tell you that kit is the way to go. Top-notch quality across the board and very well thought out. I really wish it had been out when I redid my system, or that I'd procrastinated a bit longer on my own AC so I could have gone that route. Having done AC in a few RX7s now I can highly recommend that kit. Just do that and save yourself a bunch of headaches or a sub-par AC system.
The following 2 users liked this post by derSchwamm:
Akagis_white_comet (11-07-23),
JP3 Motorsports (11-08-23)
Thread
Thread Starter
Forum
Replies
Last Post