Hey guys.

Iīve always had the idea of putting the AutoExe Rear wing mainblade for the 99spec rearwing into my Mazdaspeed rearwing..

for your help:

AutoExe:



Mazdaspeed rearwing on my Rx-7:





the Problem is that I donīt know if the main blade would fit into the Mazdaspeed wing.
I donīt think that there should be to much difference between the 99spec and the mazdaspeed main blade.

to be sure it would be great if someone of you could make a measurement of the 99spec main blade, as the attached sketch shows.

best would be if someone with the AutoExe blade could make those measurements.

thank you very much!!

reagrds
Marc

 

I have both mazdaspeed wing and 99spec. I can confirm tonight that they are the same size or not.

 

WOW... thats great. Thanks alot.

 

bad news: 99spec blade is about 2 inches shorter than the mazdaspeed blade. so, definitely it won't fit for you.

 

Good information to sticky post. But also unfortunate.

 

Thanks for your information...

well thats a pity... 2" is way to much to make a decent adapter.. 1/4 an inch on both sides would`nt be a problem.. but 2" ..

well I guess I have to realize my other idea:

GT-Wing ontop, RWB Style !! :-)