I have a freshly painted 99 spec wing...what do you guys use along the bottom edge of the wing where it touches the hatch? I know there used to be a felt strip but by now most of them have either crumbled away or are just gone after paint.

 

Sticky back neoprene strip, it's flexible enough to go around the edges of the uprights in one piece and works as per the oem gasket.

 

I used some window/door foam thing. if you find some proper felt i would love to know about it. I have also seen people use some bytul like gunk like the stuff in the doors.

 

I found this thread could be useful to answer this question, it seems like one of the mcmaster carr products mentioned down the thread would be the best answer

https://www.rx7club.com/3rd-generati...-wing-1128518/

 

If anyone is buying that foam from McMaster Carr i would love to buy some from you. They wont ship to norway and i dont trust ebay (china)

 

I just ordered some, it's going to be 10 feet long which is more than I need. I can probably send you the rest for my cost + the shipping. I ship stuff to europe quite often.

 

That would be brilliant