99 spec turn lights
09-16-02, 03:38 PM
#1
Full Member
Thread Starter
99 spec turn lights
I was wondering if you could put the 99 spec turn lights on a stock rx7. I like the 99 turn lights a lot more than the 93 lights, but i dont wont to put the 99 front end on the car.
09-16-02, 04:18 PM
#4
Full Member
Join Date: Mar 2001
Location: Washington D.C.
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Check this out...
https://www.rx7club.com/forum/showth...threadid=69648
https://www.rx7club.com/forum/showth...threadid=69648
09-16-02, 04:24 PM
#5
there is nothing really that you need to know as far as information.
you have to cut out the whole exactly to fit the 99 spec turn lamps and if you mess up then you need a new bumper. Once you get it to fit sodder the 2 connectors together (the one that went to the old turn lamps and the one hanging from the new turn lamps) this way you don't have to buy a new harness. You will also have to cut a whole bigger in the rebar to fit the backing of the new lights since they are a different shape.
Unless you are really good at working with your hands and have had much experience with body work I would advise against this and if you pay someone it's probably going to cost you a lot.
If you want to do it any way and need to get the turn lamps canman6969 on the forum sells them for the best price and he will take care of you. Add his name to your buddy list and then click on his name and choose to email him since he does not accept private messages.
If you know how to do this yourself or know someone that can help you I think it's a great idea and a good way to make your car look a ton newer. hope you have a chin spoiler as well (the 99 spec or r1/r2)
hope this helped
Snook
you have to cut out the whole exactly to fit the 99 spec turn lamps and if you mess up then you need a new bumper. Once you get it to fit sodder the 2 connectors together (the one that went to the old turn lamps and the one hanging from the new turn lamps) this way you don't have to buy a new harness. You will also have to cut a whole bigger in the rebar to fit the backing of the new lights since they are a different shape.
Unless you are really good at working with your hands and have had much experience with body work I would advise against this and if you pay someone it's probably going to cost you a lot.
If you want to do it any way and need to get the turn lamps canman6969 on the forum sells them for the best price and he will take care of you. Add his name to your buddy list and then click on his name and choose to email him since he does not accept private messages.
If you know how to do this yourself or know someone that can help you I think it's a great idea and a good way to make your car look a ton newer. hope you have a chin spoiler as well (the 99 spec or r1/r2)
hope this helped
Snook
