99 spec replica lights no where to be found?
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
99 spec replica lights no where to be found?
hi, im almost ready to get my t88 widebody fd back on the road but, i need a set of 99 spec lights. and ive tried ebay but all they have are the chromies. i want the black housing ones and im not willing to settle for the chromes.. does anyone know where i can buy them?
#2
All Hail the Magic Conch!
iTrader: (5)
https://www.rx7club.com/vendor-classifieds-276/gb-fd3s-led-tail-light-conversion-sakebomb-garage-902148/
also if you just want the 99 spec I think theorie still does the conversion.
also if you just want the 99 spec I think theorie still does the conversion.
#4
Junior Member
Join Date: Jul 2010
Location: Auburn, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#6
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/showthread.php?t=902148
also if you just want the 99 spec I think theorie still does the conversion.
also if you just want the 99 spec I think theorie still does the conversion.
Trending Topics
#12
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
lol :P well i think im gonna go with the repys then but.. i want the black ones.. im no gonna settle for the chrome ones at all
#13
Lives on the Forum
iTrader: (6)
www.rhdjapan.com has some alternatives and they ship to you within two weeks. Website is down right now though. I wanted the black ones but they only had the CF look in the style I wanted so I had the body shop guys paint the inside black.
I am putting my OEM (Stanley) 99 turn signals up for sale soon. My left unit though is slightly warped because I tried to heat the lens off for a project. No one else noticed but I am pretty ****.
I am putting my OEM (Stanley) 99 turn signals up for sale soon. My left unit though is slightly warped because I tried to heat the lens off for a project. No one else noticed but I am pretty ****.
#14
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
www.rhdjapan.com has some alternatives and they ship to you within two weeks. Website is down right now though. I wanted the black ones but they only had the CF look in the style I wanted so I had the body shop guys paint the inside black.
I am putting my OEM (Stanley) 99 turn signals up for sale soon. My left unit though is slightly warped because I tried to heat the lens off for a project. No one else noticed but I am pretty ****.
I am putting my OEM (Stanley) 99 turn signals up for sale soon. My left unit though is slightly warped because I tried to heat the lens off for a project. No one else noticed but I am pretty ****.
matt
#15
Lives on the Forum
iTrader: (6)
In the meantime, here is a shot of the turn signal assembly in question:
Note the slight bend in the lens cover on the upper center and lower right sections of the cover? I was told you could heat up the unit to pull off the lens cover but I learned this is not the case! The glue didn't even budge.
#16
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Will do. They are currently on the car at Kilo Racing in Orlando while my other pair is retrofitted with Audi style LEDs. This will be completed early in the week and I hope to go down on Tuesday or Wednesday.
In the meantime, here is a shot of the turn signal assembly in question:
Note the slight bend in the lens cover on the upper center and lower right sections of the cover? I was told you could heat up the unit to pull off the lens cover but I learned this is not the case! The glue didn't even budge.
In the meantime, here is a shot of the turn signal assembly in question:
Note the slight bend in the lens cover on the upper center and lower right sections of the cover? I was told you could heat up the unit to pull off the lens cover but I learned this is not the case! The glue didn't even budge.
#17
Original Gangster/Rotary!
iTrader: (213)
The replicas have had quality problems in the past, to include water clouding behind the lens and warping. Those may have been addressed in the more recent copies.
It's a personal choice---personally I choose to steer clear of replicas and copies in most cases, unless the authentic products are impossible to find or priced in the stratosphere.
The OEM combo lights aren't $500 per pair brand new, and after I bought my URAS set, I think I sold my good condition used Stanleys for around $250 or so. They are available for a reasonable price, you just have to look around.
It's a personal choice---personally I choose to steer clear of replicas and copies in most cases, unless the authentic products are impossible to find or priced in the stratosphere.
The OEM combo lights aren't $500 per pair brand new, and after I bought my URAS set, I think I sold my good condition used Stanleys for around $250 or so. They are available for a reasonable price, you just have to look around.
Last edited by GoodfellaFD3S; 07-24-10 at 03:45 PM.
#18
Form > Function
iTrader: (109)
Im not sure how other people feel, but Nengun (http://www.nengun.com/) seems to be a pretty good source. That and like others have said; RHDJapan.com.
-M
-M
#20
Senior Member
Thread Starter
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
unfortunatley you cant heat them up like the tail lights thats how his warped in the picture :P..
#25
Lives on the Forum
iTrader: (6)
I bought another set from rhdjapan:
http://www.rhdjapan.com/uras-front-c...mps-fd3s-58024
These come right apart and are held together by a few tabs. Note they don't have the black ones anymore, only cf, so you'll need to paint the inside if you want black.