HDP

iTrader: (2)

Rotary Extreme was the only place I knew that sold fiberglass copies of the oil cooler ducts but I'm sure there has to be others. Does anyone have info on where to purchase a pair? TIA.

dubulup

probably not the answer you want to hear...but get bigger coolers and fill the opening

moconnor

iTrader: (14)

R Magic also makes these. Perhaps FDNewbie could get you a pair.

Mahjik

iTrader: (1)

I believe Corksport sells the '99 Oil cooler/brake ducts.

Jason

iTrader: (5)

I also carry them.

Jason

HDP

iTrader: (2)

I'll check the website. Thanks.

HDP

iTrader: (2)

I went to their website but I couldn't make heads or tails of what was printed. Do they have an English translation?

HDP

iTrader: (2)

Well, it's not that I don't want to hear it, it just doesn't address the question I asked.

HDP

iTrader: (2)

Searched, but could not find them...

Mahjik

iTrader: (1)

Just give Jason's store a call over the phone. I'm sure he can get them, but due to the lack of volume orders he probably doesn't list them on the site. Here's Corksport's page:

http://corksport.com/store/category/...rior_misc.html

HDP

iTrader: (2)

Thanks!

HDP

iTrader: (2)

Are the ones you carry the Rotary Extreme design? The reason I ask is because I ordered a dual set earlier this year and one did not fit properly. After shipping them back and talking with Chuck, I was told that something apparently happened to the mold because the remainder of the duct he had also "looked" like the ones I returned. And since he didn't have a passenger side cooler to test fit with, there was no need risking another misfit.

HDP

iTrader: (2)

Bump for more info...

Jason

iTrader: (5)

I carry the original Mazda parts. I will try to put them up on the site this weekend.

Jason

HDP

iTrader: (2)

So they are the combination brake/oil cooler ducts that mount to the undertray?

HDP

iTrader: (2)

Bump for more info...

HDP

iTrader: (2)

Still waiting for info...

HDP

iTrader: (2)

And still waiting...

Mahjik

iTrader: (1)

What info are you waiting on?

GoodfellaFD3S

iTrader: (213)

I received one of the last sets rotary extreme sold before closing up shop. If one of them doesn't fit, I am going to be PISSED.

HDP

iTrader: (2)

Have you done a test fit yet or visually inspected them to look for any noticable differences?

HDP

iTrader: (2)

Ducts to be listed and/or info on how to order them.

Mahjik

iTrader: (1)

They are at Corksport. I provided the link on the first page.

HDP

iTrader: (2)

Well, I would like to shop around for the best deal. Can't do that with info from only one source.

BTW, I see only one page... post numbers are more helpful.

Mahjik

iTrader: (1)

Not everything is going to have more than one source. If you want more sources, you are going to have to get proactive and either pick up the phone to call around, or start emailing shops directly.

Most shops can get or order just about any part you might want/desire, but they basically only list parts on their sites which they keep in stock (i.e. they don't keep low sale volume stuff in their warehouses).