99 spec lights convert em?
09-03-04, 09:15 AM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Sep 2004
Location: st. george
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
99 spec lights convert em?
i have apair of 99 speclights i got from respecttheseven, (good part). i luv em! but i was thinkin, 
and i wanna open em up to lay carbon fiber vinyl over em. any ideas?
and i wanna open em up to lay carbon fiber vinyl over em. any ideas?
09-03-04, 09:51 AM
#3
Rotary Enthusiast
Join Date: Dec 2003
Location: salt lake city area
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
open em up
dude, grab ur cheapest heat gun and set it on low, be PATIENT. and the glue that holds them together will soften. trace the shape of the light with the gun for around 5 minutes and keep the gun roughly 3 inches-5inches away. then grab a butter knife and they will pop right open! hope i helped.
Last edited by respecttheseven; 09-03-04 at 09:54 AM.
09-03-04, 11:17 AM
#5
Full Member
Join Date: May 2002
Location: Tampa Bay Florida
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
interesting idea; but, would you be able to notice black carbon fiber inside the already tinted housing on the tail lights? umm.... would the juice bet worth the squeeze?....
09-03-04, 12:41 PM
#6
Eats, Sleeps, Dreams Rotary
it looks really good imo...
mark koch made some but I would just use a 93-95 FD standard lights and do the conversion instead of altering the 99 spec lights.
http://www.markkoch.net/carbonFiber/pastProjects.asp
*if you do a search I think someone posted some pics...
mark koch made some but I would just use a 93-95 FD standard lights and do the conversion instead of altering the 99 spec lights.
http://www.markkoch.net/carbonFiber/pastProjects.asp
*if you do a search I think someone posted some pics...
Thread
Thread Starter
Forum
Replies
Last Post