If I were to buy the 99 spec front bumper kit from rx7store.net would I still need to trim the nose or buy any additional parts to get it properly mounted to the car? Also would this work with the oil cooler ducting?

http://www.rx7store.net/product_p/99%20spec%20kit.htm


Thanks,
Shogun

 

you would not need to trim, because it comes with the 99 rebar...once it is on, you will have to adjust for tight fitting lines... be patient... it should be a straight forward swap...the stock oil cooler ducts will not work unless you cut them up to make them larger. You can purchase the re 99 oil cooler ducts that fit great...

 

where do you buy the re oil cooler ducts?

and by that where do you buy the re stuff from? i looked at there website and it all in kanji

 

re amemiya=kanji site
re=rotary extreme=english site

 

Is "Rotary Extreme" the USA division of RE Amemiya? Huh...I never knew that. Or just coincidence in the abbreviations?

 

oh sorry...I used rotaryextremes 99 oil cooler ducts...chuck will be able to help you out...

 

No!

Just the abbreviation. No way Chuck is an employee of RE Amemiya... At least he never told me about it.

 

The RX7store is Rotary Extremes stuff in the case of 99' spec nose with no plate. Also it doesn't come with the rebar unless you get the Mazda OEM part.

 

if you click the link you will see that he is looking at the 99 kit from the rx7store, and that does include the rebar...also shogun you will need to drill out the rivets on the aluminum support from the stock bumper and transfer it to the 99 bumper in order to install it

 

cool thanks a lot for the info!

 

chuck is cdm not jdm

 

Hey you can cut your 93 rebar to fit those lights.

 

I think corksport.com is cheaper.

 

Call me and I will beat Corksports pricing.

Jason

 

Buy it thru Jason (RX7store).
Jason supports and sponsors more rotary events than damn Corksports people. I've contacted corksports for past two years about them sponsoring an all rotary event.. NOTHING! Jason has always supported and beyond the expected amount of support for Deals Gap Rotary Rally... So, don't buy it from some other vendors who don't give a **** about the rotary community except to make money!